Essential Extractor Gin Series – Keg Kit – High Volume Column – 3″

Essential Extractor Gin Series – Keg Kit – High Volume Column – 3″

The Keg Kit for our Essential Extractor PSII High Volume Gin Series Distiller includes all of the items in our Complete Unit, with a Keg Adapter (including clamp and o-ring for keg) in place of our kettle. The high-capacity column is 3″ in diameter, allowing you to distill at more than twice the speed of standard 2″ distillation columns while maintaining the highest possible purity.

Brewhaus’ Essential Extractor Pro Series II High Volume Gin Series column features a unique 4-piece design that enables the distiller to perform either pot distillation, reflux distillation, or infusions in one step. Use the full-length, 4-piece column for reflux mode (e.g., fuel alcohol, vodka) or infusions, or just use one column section for pot mode (e.g., essential oils, whisky, water).

About the Pro Series’ Cooling System:
By placing the cooling lines near the top of the distillation column, reflux is created where it is intended- at the top of the tower. This allows for the most effective use of the column filling by causing the refluxed liquid to flow down through it, resulting in a cleaner distillate. Crossing the cooling lines instead of leaving them parallel results in a much more efficient cooling system, requiring less cooling water while maintaining effectiveness. And, by having the cooling system in direct contact with the rising vapor you achieve a far more efficient and effective cooling than systems that surround a column with a cooling water jacket. The slow heat transfer rate through the thick column wall is much less efficient, and concentrates all of the cooling ability around the outside of the distiller column. The result of jacketed columns is liquid channeling down the walls of the column, while not cooling the majority of the vapor as it is not in contact with the column wall. While such a system may operate faster, it is at the expense of quality.

Features:

Runs in reflux mode, pot distillation mode, alembic mode, and does one-step flavor infusion
3″ in diameter, making it capable of distilling at more than twice the speed of standard 2″ columns
Approx 4′ total height
Made of dairy grade Stainless Steel beverage tubing
Can be packed with either copper mesh for distilling alcohol, or ceramic Raschig rings for distilling water or essential oils
Can be attached to a standard-sized beer keg

Includes:

Includes:

• 4-piece stainless steel column (gin basket, condenser, dephlegmator, column)
• 4 stainless steel tri-clamps
• 4 EPDM chemical tolerant gaskets
• Tri-Clamp reducer with corresponding clamp and o-ring for keg
• Hoses with hose clamps
• Submersible pump
• Water control system
• Copper column packing
• Pure tan gum bung
• Laboratory grade thermometer